Table: 27.6” x 49.6” (700 x 1260mm)
Longitudinal travel (X-axis): 43.3” (1100mm)
Cross travel Z: 35.4” (900mm)
Vertical travel Y: 32.6” (830mm)
Spindle nose to table top (D): 9.6”-42.3” (245-1075mm)
Load capacity: 1870 lb (850 Kg)
Spindle taper: BT50 or CAT50
Spindle Speed (r. p.m.): 4500 rpm
Transmission of spindle & motor: Belts
Spindle nose to table center: 7.8”-43.3” (200-1100 mm)
Feed Rate:
Rapid feed rate: X/Z: 700 ipm; Y: 400 ipm
Cutting feed rate: 1-360 ipm
Motor:
Spindle motor/max torque: 25HP, 20KW
Feed motors on XYZ: 2/3 KW
Coolant pump: 0.6Hp
Lubrication pump: 150W
Power requirement: 40 KVA, 3 Phase 208-230 voltage
Automatic Tool Changer
No. of tools: 24 Armtype
Max. tool weight: 30 lb (15 Kg)
Length X Width X Height (LXWXH): 116”x 135”x 112”
Net Weight: 14,080 lbs. (6400 Kgs)
|
STANDARD ACCESSORIES:
|
|
|
Tools & box
|
Half Guarding
|
Shop floor programming/Conversational
|
|
Leveling bolts & plate
|
USB 2.0 Port
|
Auto Lubrication / coolant system
|
|
RS-232
|
Auto lube system
|
Halogen work light
|
|
Operation manual
|
Air blast, coolant flush gun
|
1 GB solid state hard drive
|
|
Additional Accessories information:
|
|
|
Power requirement
|
32 KVA 3 phase 208 V/230 V max
|
|
Air requirement
|
90 - 100 psi
|
|
Type of oil for Way oil / oil chiller / pneumatic oil
|
Mobil Vactra #2 / Shell Tellus 32 / Air tool oil
|
|
Coolant capacity
|
36 Gallons
|
