La Máquina Excelente-ATRUMP 1740 NC

Centroid T400S control with 15” LCD
10HP Spindle Motor, D1-8, 3-1/8” through hole spindle
Max 2,000 rpm spindle speed with autoshift hi-med-lo gear range
Hardened & Ground with turcite-B coating guide way
C5 Double nut precision ball screws hardened & ground for high accuracy and long lasting
FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
100% Laser tested for positioning accuracy & repeatability
MASSIVE ONE PIECE CASTING CONSTRUCTION FOR MAXIMUM CUTTING PERFORMANCE
Rugged cast iron design to provide maximum rigidity & stability
Tool box & Tools
Coolant System
Central lubrication system
Built-in Quartz work light
Dual Hand Wheel for manual operation

SPECIFICATION:

Model	KL1740NC
Basic dimension	L x W x H 98" x 50" x 71"
Height of Center	220 mm 8 5/8inch
Swing over Bed	440 mm 17 5/16 inch
Swing over Cross Slide	190 mm 7 1/2 inch
Distance Between Centers	1000 mm 40 in.
Bed
Width of Bed ways	330 mm 13 inch
Spindle
Spindle nose mounting	STD: D1-8 Camlock
Spindle bore	STD: 82 mm 3-3/8 inch
Taper of spindle bore	M.T.#7 (Sleeve M.T.#5)
Chuck size range	6”, 8” or 10” Max
Range of spindle speeds	Autoshift High - Low 75, Med 340 High 1880 RPM
Longitudinal travel (Z axis)	(Ball screw 40㎜x10㎜ C5) 920 mm 36.25 in.
Cross slide travel (X axis)	(Ball screw 25㎜x 5㎜ C5) 280㎜ 11.inch
Rapid travel / Cutting feed rate	230 / 150 ipm
Tool
Max. size cutting tool	25 mm 1inch
Tailstock
Tailstock quill diameter	75 mm 3 inch
Tailstock quill Taper	M.T.#5
Tailstock quill travel	160 mm 6 5/16 inch
Motor
Main spindle motor	10 HP. 7.5 kw
Machine Net weight	3,960 lbs. 1800 kgs.
Crate Dimension	(L x W x H) 118” x 71”x 80”

Standard Accessories:

Tools & box	Full guarding	Shop floor programming/Conversational
Leveling bolts & plate	Auto lube system	15” color LCD
RS-232 Interface	Halogen work light	USB 2.0 port
Operation manual	Coolant system	1 GB solid state hard drive

Additional Accessories information:

Power requirement	14KVA 3 phase 208 V / 230 V max
Type of oil for Way oil / Gear oil / pneumatic oil l	Mobil Vectra #2 / Mobil 1 gear / Air tool oi
Coolant capacity	3.5 Gallons