|
| Atrump M632 CNC Machining Center |
|
|
|
|
| Atrump M632 CNC Machining Center |
| MODEL |
M632 CNC Machining Center |
|
|
 |
 |
25HP Spindle Motor
|
|
BT50 or CAT50 Spindle Taper
|
|
4,500 rpm spindle speed
|
|
Included spindle oil cooler
|
|
24 tools ATC Armtype
|
|
Hardened & Ground
|
|
Turcite-B coating guide way |
|
|
|
|
 Click to enlarge this imageRequest a quote See our accessory Tell a friend |
 |
|
- Centroid M400 control with 15” LCD
- 24 tools ATC Armtype
- 25HP Spindle Motor, BT50 or CAT50 Spindle Taper
- 4,500 rpm spindle speed with spindle oil cooler
- Hardened & Ground with Turcite-B coating guide way
- C3 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
- 100% Laser tested for positioning accuracy & repeatability
- 4 Box ways design on Y axis to provide maximum rigidity & stability
- Telescopic steel way cover on three axes
- Tool box & Tools
- Coolant System and air blast system
- Central lubrication system
- Built-in Quartz work light
- Rigid tapping(opt.)
- Portable Hand Wheel (opt
| Specification: |
|
| Table: |
28” x 71” (714 x 1800 mm) |
| Longitudinal travel (X axis ): |
63” (1600 mm) |
| Cross travel: |
31.5” (800 mm) |
| Vertical travel: |
31.5” (800 mm) |
| Spindle nose to table top (D): |
8.1”-39.6” (207-1,007 mm) |
| Load capacity: |
4,000 lbs (1,818 Kgs) |
| Spindle taper: |
BT50 or CAT50 |
| Spindle Speed (r. p.m.): |
4500 rpm (opt.6000rpm) |
| Transmission of spindle & motor: |
Belts |
| Spindle center to column front surface: |
33.3” (845 mm) |
| Feed Rate: |
|
| Rapid feed rate: |
X/Y: 360 ipm Z: 288 ipm |
| Cutting feed rate: |
1-240 ipm |
| Motor: |
|
| Spindle motor/max torque: |
18KW, 25HP/100NM |
| Feed motors on XYZ: |
4 KW |
| Coolant pump: |
0.6HP |
| Power requirement: |
40 KVA, 3 Phase 208-230 voltage |
| Automatic Tool Changer |
Armtype |
| No. of tools: |
24 |
| Max. tool diameter: |
4.9” (125 mm) |
| Max. tool length: |
|
| Max. tool weight: |
33 lbs (15 Kgs) |
| Length X Width X Height (LXWXH): |
169.5” x 130” x 113”
(4300mm x 3300mm x 2865mm) |
| |
|
| Net Weight: |
25,080 lbs. (11400 Kgs) |
Standard Accessories:
| Tools & box |
Splash Guard |
Shop floor programming/Conversational |
| Leveling bolts & plate |
USB 2.0 Port |
Coolant system |
| RS-232 |
Auto lube system |
Halogen work light |
| Operation manual |
Air blast, coolant flush gun |
1 GB solid state hard drive |
Additional Accessories information:
| Power requirement: |
40 KVA 3 phase 208V/230Vmax |
| Air requirement: |
90 - 100 psi |
| Type of oil for Way oil / oil chiller / pneumatic oil |
Mobil Vactra #2 / Shell Tellus 32 / Air tool oil |
| Coolant capacity: |
42 Gallons |
|
| |
Similar Products |
M422W CNC Machining Center | M526 CNC Machining Center | | | |
|
|
