|
|
|
|
| Atrump B3EC CNC Bed Mill |
|
|
 |
 |
5HP Spindle Motor
|
|
NMTB40 or CAT40 Spindle Taper
|
|
Programmable 50 to 6,000 rpm spindle speed
|
|
Power Draw Bar installed
|
|
Hardened & Ground with Turcite-B coating guide way |
|
|
|
|
 Click to enlarge this imageRequest a quote See our accessory Tell a friend |
 |
|
- Centroid M400 control with 15” LCD
- ISO 9001 quality assurance
- 5HP Spindle Motor, NMTB40 or CAT40 Spindle Taper
- Programmable 50 to 6,000 rpm spindle speed with HI-LO pully
- Hardened & Ground with turcite-B coating guide way
- C3 Double nut precision ball screws hardened & ground for high accuracy and long lasting
- FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliabilit
- 100% Laser tested for positioning accuracy & repeatability
- Box ways design on Y axis to provide maximum rigidity & stability
- Standard way cover on three axes
- Tool box & Tools
- Coolant System
- Central lubrication system
- Built-in Quartz work light
- Portable Hand Wheel (opt.)
Specification:
| Table: |
10” x 50” (254 x 1270mm) |
| Longitudinal travel (X axis ): |
31.5” (800mm) |
| Cross travel: |
16” (410mm) |
| Vertical travel: |
20.1” (510mm) |
| Spindle nose to table top (D): |
3”-23” (80-590mm) |
| Load capacity: |
1000 lb (450 Kg) |
| Spindle taper: |
NMTB40 or CAT40 |
| Spindle Speed (r. p.m.): |
60 to 6000 rpm |
| Transmission of spindle & motor: |
Belts |
| Spindle center to column front surface: 17” (430 mm) |
|
|
Feed Rate:
|
|
| Rapid feed rate: |
X/Y/Z: 150 ipm DC |
| Cutting feed rate: |
1-120 ipm |
| Motor: |
|
| Spindle motor/max torque: |
5HP |
| Servo motors on XYZ: |
29 in-lbs |
| Coolant pump: |
1/8 Hp |
| Lubrication pump: |
150W |
| Power requirement: |
6.5 KVA, 3 Phase 208-230 voltage |
| Automatic Tool Changer |
|
| No. of tools: |
N/A |
| Max. tool diameter: |
3.5” (90 mm) |
| Max. tool weight: |
15 lb (7 Kg) |
| Length X Width X Height (LXWXH): |
116” x 61” x 89”
(2950mm x 1550mm x 2260mm) |
| Net Weight: 4,500 lbs. (2500 Kgs |
|
STANDARD ACCESSORIES:
| Tools & box |
Splash Guard |
Sfloor programming/Conversational |
| Leveling bolts & plate |
USB 2.0 Port |
Power Draw Bar |
| RS-232 Interface |
Auto lube system |
Halogen work light |
| Operation manual |
Coolant system |
1 GB solid state hard drive |
Additional Accessories information:
| Power requirement |
6.5 KVA 3 phase 208 V/230 V max |
| Air requirement |
With opt. power draw bar 90 - 100 psi |
| Type of oil for Way oil / oil chiller / pneumatic oil |
Mobil Vactra #2 / Shell Tellus 32 / Air tool oil |
| Coolant capacity |
7 Gallons |
|
| |
Similar Products |
E216 Maxi-Mill CNC Machining Center | | | | |
|
|
