Welcome to our Tool and Cutter Grinder and CNC Machine Tools Website-Aone 3VK 2 plus1 CNC Knee Mill

3 HP Spindle Motor, R8 Spindle Taper
5,000 rpm spindle speed with HI-LO gear
Hardened & Ground with turcite-B coating guide way
Precision ballscrews for high accuracy and long lasting
FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
Anti rust chrome quill
Box ways design on Y-axis to provide maximum rigidity & stability
Standard way cover on three axes
Tool box & Tools
Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002
Automatic lubrication system
Built-in Quartz work light
Hard limit switch
2-axis plus 3 rd axis Simultaneous

Specification:

Table:	10” x 50”
Longitudinal travel (X axis):	31”
Cross travel:	14 1/2”
Z axis travel cnc quill:	5” (manual), 4” (cnc)
Knee travel (manual):	16”
Quill diameter:	3.375” (86 mm)
Spindle nose to table top (D):	0.75”-16.75” (20 - 426mm)
Load capacity:	600 lb.
Spindle taper:	R8
Spindle Speed (r. p.m.):	70 to 5000 rpm with Hi/Lo gear
Transmission of spindle & motor:	Timing Belt
Spindle center to column front surface:	6.875” to 23.50” (175 - 597mm)
Head:
Swivel (left/right):	90 degree
Tile (front/back):	45 degree
Motor:
Spindle motor/max torque:	3 HP (Std.) 5 HP (Opt.)
KVA rating:	4 KVA, 15 amps
Coolant pump (optional)	1/8 Hp
Lubrication pump:	Automatic
Power requirement:	4 KVA, 3 Phase 208-230 voltage
Length X Width X Height (LXWXH):	108” x 77” x 92”

Net Weight:	3,100 lbs. (1420 Kgs)

Standard Accessories:

Tools & box 29 in/lbsa	DC motor	Centroid 2-axis + 3-axis M-400-S control
Leveling bolts & plate	Draw bar	Coolant system
Way cover	Automatic lube system	Halogen work light
Operation manual	R8 spindle

Additional Accessories information:

Power requirement	4 KVA 3 phase 208V/230Vmax
Air requirement	With opt. power draw bar 90 - 100 psi
Type of oil for Way oil / pneumatic oil	Mobil Vectra #2 / Air tool oil
Coolant capacity	7 Gallons