DP9- Female connect from spindle encoder to inverter Mitsubishi.

            Pin 1= 5V -5vdc                                   Red
            Pin 2= SG- 5vdc common                  Red \ Black
            Pin 3= PB1-channe A+                       White
            Pin 4= PB2-channel A-                    White \ Black
            Pin 5= PA1-channel B+                      Blue
            Pin 6= PA2- channel B-                     Blue\ Black
            Pin 7= PC1-Channel Z+                     Green
            Pin 8= PC2-channel Z-                    Green\ Black

 

………………………………………………………………………………

 

DP9 –Male connect from SD3 or axis 5 in the console  to inverter Mitsubishi.

 

           Pin 1 = none

           Pin 2 = SG-5vdc common           Red / Black 

           Pin 3 = PC2-channel Z-              Green / Black

           Pin 4 = PB2-channel A-              White / Black

           Pin 5 = PA2-channel B-              Blue / Black

           Pin 6 = PC1-channel Z+              Green

           Pin 7 = PB1-channel A+             White

           Pin 8 = PA1-channel B+              Blue

           Pin 9 = 5V-5vdc                            Red           

……………………………………………………………………………

          Inverter control cable from RTK3 to Mitsubishi inverter

          RTK3                                                                               Mitsubishi inverter

         1.   Green = Reset / out 15                                           RES reset input                         

         2. Blue = output 10,14,15 common                            SD                                         

   3. Grey = orient/ out 10                                                RH  Orient command input        

         4 and 5 jumper

         6.White = spin fwd/out 13 NC                                       STF                                              

         7. Black = spin rev /out 13 NO                                      STR                                              

         8. Brown = analog out                                                    2     0-10 vdc                                                  

         9.Violent = analog common                                          5    0-10vdc common              

        10. Light green = zero speed/in 19                               RUN zero speed output                  

        11. Red = Orient complete/in 21                                    FU orient complete output         

        12.Orange = fault in 25                                                    A fault output N/O                      

        13. Pink = at speed/in 20                                                SU               

        14. Yellow = input common                                            C-SE    output common                      

        15. Ground = shield                                                         Ground