CNC Lathe with Door Switch
Parameter 178
|
Bit # |
Value |
Function |
|
Bit 11 |
2048 |
Door Switch NC / NO. Default – NC |
Add 2048 into the existing value in parameter 178 to change door switch state.
The door open, Spindle should not run, it has a message "Door open while job running". If spindle run with door open , we have to change Parameter 178 is add or take a way 2048. Usually, Parameter 178 is 0.
Parameter 178 is a positive number.
F1 set up >> F3 Config >> 137 enter >>F3 Params >>F1 Next table .Change Parameter 178 and press F 10 Save.
