PLC Functions For Parameter 178

 

   This is plc function that we can change between normal open and normal close,

 For example: Auto Lube is wired signal normal close. If you wire normal open, the control Centroid will show alarm “ Low Lube” you have to add 1 to value of parameter 178.

 

 

LubeNONC             IS MEM200 ; P178 Bit 0 (1)

SpindleNONC          IS MEM201 ; P178 Bit 1 (2)

AirSignalNONC        IS MEM202 ; P178 Bit 2 (4)

ToolCounterNONC      IS MEM203 ; P178 Bit 3 (8)

ServoFaultNONC       IS MEM204 ; P178 Bit 4 (16)

ZeroSpeedNONC        IS MEM205 ; P178 Bit 5 (32)

OrientCompleteNONC   IS MEM206 ; P178 Bit 6 (64)

;NoReverseSpindle    IS MEM207 ; P178 Bit 7 (128)

ReverseClamp         IS MEM208 ; P178 Bit 8 (256)

SpinRangeNONC        IS MEM209 ; P178 Bit 9 (512)

ChillerFaultNONC     IS MEM210 ; P178 Bit 10 (1024)

DoorSWNONC           IS MEM211 ; P178 Bit 11 (2048)

ToolThruNONC          IS MEM212 ; P178 Bit 12 (4096) /ATC Lock NONC for Lathe .

;uP178Bit13          IS MEM213 ; P178 Bit 13 (8192)

;uP178Bit14          IS MEM214 ; P178 Bit 14 (16384)

;uP178Bit15          IS MEM215 ; P178 Bit 15 (32768)