Set Parameter Inverter Teco 7300-CV For Milling Machines

                                            

                                    

 

   0-00 : Control Mode : 0002 V/F control

0-01 : Motor Rated Voltage 220 V.

0-02 : Motor Rated Current 16 Amp (5 Hp)

0-03 : Motor rate KW (3.7 Kw).

1-00: Run Command source selection: 0001 External Run/stop control.

1-01 : 0000 : Fwd/stop – Rev/stop

1-05 : 0 Controller deceleration to-stop with DC injection braking.

1-06 : 2 External Analog signal input or Remote Potentiometer.

3-00 : Frequency Upper Limit (Hz) : 135 Hz for 4VK –4000rpm.

3-01 : Frequency Lower Limit ( Hz) : 0 Hz .

3-02 : Acceleration Time : 3 ( second ).

3-03 : Deceleration Time : 3 (second).

7-00 : AIN Gain % : 80 for 4VK –4000rpm.