1                                                                                      2

                                     

              Put leveling cones (pads) before                               Turn Z-axis nut clockwise...

              put machine down .                                                        to lift the Z head up.

 

                                             3                                                                                      4

                                      

                Then remove the wood block.                                     Turn Z nut counter-clockwise...

                                                                                                           to move the Z head down, and counter

                                                                                                           balancing will go up just enough..

                                                 5                                                                                       6

               

                                            

                     To move the locking bar on back                               Remove support bar under carousel.

                      of column.

                                                 7                                                                                       8

                                               

                Remove bracket (orange) that hold                                      Leveling.

                carousel from moving in and out.

                                                     9                                                                                  10

                                              

                   Remove bar on top of Enclosure door.                          Adjust Full Enclosure

                                         11                                                                                           12

                                                

                 Adjust coolant tank.                                                               Connect collant hose.

                                            13                                                                                       14

                                            

                 Install console                                                                  Then keyboard

                                              15

                

                 Fill with coolant